The structure,depositional style and accumulation characteristics of continental margin with diachronous breakup in the northern South China Sea     

Yunfan Zhang  Jiangyang Zhang  Lijie Wang 《International Geology Review》2020,62(7-8):1006-1018

ABSTRACT

A typical diachronous breakup developed in the South China Sea (SCS); the breakup has been unequivocally identified, and gradually decreases in age from NE to SW. To illustrate the influence of a diachronous breakup on hydrocarbon accumulation, we used seismic profiles from CNOOC, and analysed crustal extension characteristics, sedimentary style and source rock accumulation. The main conclusions are as follows: (1) Because of the diachronous breakup in the SCS, various tectonic units developed in different positions on the northern continental margin with different degrees of extension. The Pearl River Mouth Basin (PRMB) is closer to the central sea basin of the SCS and has been affected by regional tension stress for a longer time. Tectonic units of proximal domain, necking zone, and distal margin types developed, and the crust structure thinned from the land towards the sea. The Qiongdongnan Basin (QB) is closer to the Southwest Sub-basin. There are symmetrical proximal domains on the southern and northern sides of the QB, with a necking zone in the central part. It presents as an abandoned passive continental margin. (2) The PRMB exhibited rifted cells first, followed by canyon type extensional faulting and horizontal axial transportation, and then by a longitudinal shelf-slope sedimentary style. But the QB has only rifted cells and canyon type faulting stages, no longitudinal shelf-slope sedimentary stage. The major source rocks in the northern SCS become younger from east to west, and the sedimentary facies change from lacustrine facies to marine-continental transitional facies. (3) The diachronous breakup process ultimately affecting oil and gas migration and accumulation process. The PRMB is dominated by deep-water shelf break accumulation with deep-water fan reservoir bodies. The QB is dominated by canyon type accumulation with channels.  相似文献   

辽东岫岩地区下古生界碎屑锆石定年:罗迪尼亚和冈瓦纳超大陆在华北遗留的痕迹？     

董晓杰  陈煜嵩  刘正宏  徐仲元  沙茜 《岩石学报》2020,36(6):1857-1869

超大陆演化是地质研究的重要内容,华北克拉通与不同地质历史时期超大陆汇聚与裂解的联系对反演华北克拉通构造演化历史具有重要意义。本文在辽吉古元古代造山带中段的原划分为辽河群地层中首次识别出一套早古生代沉积建造。这套沉积建造与华北克拉通以浅海相的碳酸盐岩为主的早古生代沉积并不一致,以发育大量的陆源碎屑沉积为特征。我们对2件细砂岩分别进行了锆石LA-ICP-MS和SHRIMP U-Pb定年。定年结果显示,2件样品的最小年龄分别为～482Ma和～498Ma,反映了它们的最大沉积时代。2件样品的碎屑锆石年龄主要介于1600～500Ma,缺乏亲华北的物源信息,表明它们的物源主要来自于华北之外。2件样品年龄谱中最重要的峰值出现在格林威尔期和泛非期,表明华北克拉通曾与罗迪尼亚超大陆和冈瓦纳大陆存在联系。格林威尔期碎屑锆石可能来自于罗迪尼亚超大陆时期波罗地古陆物质在华北克拉通东缘的再循环;泛非期碎屑锆石可能来自于东冈瓦纳大陆的北缘造山带。  相似文献   

断层附近地应力扰动带宽度及其影响因素   总被引：3，自引：3，他引：0  

翁剑桥  曾联波  吕文雅  刘奇  祖克威 《地质力学学报》2020,26(1):39-47

在建立正断层模型的基础上，利用三维有限元数值模拟方法研究了断层附近地层中的地应力变化规律。其结果表明，由于断层活动，在断层附近普遍发育应力扰动带；在应力扰动带范围内，地应力方向和大小发生明显的变化，断层中部附近应力值普遍较低，而断层端部的应力值通常异常增大。应力扰动带的分布范围主要受断层规模的控制，与断裂带的岩石力学性质、断层走向、断层面形态和边界应力条件等因素也密切相关。随断层长度和断距逐步增大，应力扰动带的宽度相应增加。断裂带的岩石越破碎，其岩石弹性模量越低，断层对地应力的影响宽度越大。断层走向与区域最大水平主应力方向越接近垂直、断距与断层长度的比值越大，区域内的差应力越大，则扰动带宽度与断层规模的比值也越大。选择渤海湾盆地BZ-X油田进行验证，在建立油田实际三维地质模型基础上，根据边界应力条件，利用三维有限元方法对沙河街组二段的地应力分布进行了数值模拟计算。根据断层周围的地应力变化，确定了应力扰动带的分布范围，断层附近应力扰动带宽度的分布规律与正断层模型分析结果相一致。   相似文献   

黔中—渝南铝土矿含矿岩系微量元素区域分布特征及物质来源探讨          下载免费PDF全文

刘平  韩忠华  廖友常  聂坤 《贵州地质》2020,37(1):1-13

黔中—渝南成矿带石炭纪铝土矿含矿岩系,分别形成于修文、息烽—遵义和黔北—渝南三个沉积区,大多数铝土矿属产于碳酸盐岩侵蚀面上的、少数为产于泥页岩侵蚀面上的硬水铝石沉积型铝土矿床。修文沉积区铝土矿中Zr、RE2O3含量最多,息烽—遵义沉积区铝土矿中Ga含量最多,黔北—渝南沉积区Li含量最多,各有特色。修文沉积区铝土矿含矿岩系的母岩,是其下伏寒武系碳酸盐岩与下奥陶统页岩、灰岩、白云岩;息烽—遵义沉积区含矿岩系的母岩为下伏下奥陶统页岩、灰岩及白云岩;黔北—渝南沉积区含矿岩系的母岩,是下伏下志留统泥、页岩和上石炭统石灰岩。碳酸盐岩中Al2O3与稳定的微量元素含量甚少,要演变成大面积铝土矿,必须要配以足够的含Al2O3和微量元素较多的泥、页岩,才可能满足形成大规模铝土矿的物质需求。  相似文献   

南海西北部夏冬季浮游介形类的分布及其影响因素     

廖彤晨  尹健强  李开枝  谭烨辉 《热带海洋学报》2020,39(2):77-87

海洋浮游介形类(Ostracods)是一类分布较广的小型甲壳动物, 在海洋碳循环中起重要作用。目前国内海洋浮游动物采样常使用505μm网目孔径的浮游生物网, 从而导致个体较小的介形类被忽略。文章根据2006年7—8月(夏季)和2006年12月—2007年1月(冬季)在南海西北部海域分别使用网目孔径为505μm和160μm浮游生物网采集的样品, 比较不同网目所获浮游介形类种类和丰度的差异, 分析介形类种类和丰度的分布特征, 探讨环境因素对其时空分布的影响。160μm网目采集的浮游介形类种类和丰度均高于505μm。基于160μm网目数据分析浮游介形类群落结构: 1) 鉴定浮游介形类32种, 其种数由近岸向外海递增, 等深线100m以浅海域的种数显著高于100m以深海域(p<0.01); 2) 夏季浮游介形类的丰度高于冬季, 夏季丰度高值区主要出现在雷州半岛东部和琼东近岸, 显著高于外海(p<0.05), 冬季介形类丰度分布较为均匀; 3) 优势种针刺真浮萤(Euconchoecia aculeata)是近岸高丰度的主要贡献种; 4) 介形类种数与温度和水深呈显著正相关, 丰度与叶绿素a浓度呈正相关, 而与温度和盐度呈负相关。夏季琼东沿岸上升流和粤西沿岸流有助于浮游介形类在雷州半岛和海南岛东部近岸海域形成较高的丰度, 最高达1252个·m^-3。同时, 建议今后研究浮游介形类采用网目孔径小的浮游生物网进行采集以便全面评估其群落结构特征。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings     

Santosh Kumar Yadav  Guan-lin Ye  Usama Khalid 《Marine Georesources & Geotechnology》2020,38(4):400-416

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.  相似文献   

湖南省似大地水准面2017模型及精度分析     

董明旭  李建成  华亮春  姜卫平  尹昊华  敖敏思  曾翔强 《大地测量与地球动力学》2019,39(1):66-71

利用近7万个湖南及邻近省份重力观测数据、502个GNSS/水准控制点及数字高程模型，以EIGEN-6C4全球重力场模型作参考重力场，采用顾及地球曲率影响的各类地形质量位及引力的第二类Helmert凝集法严密算法，利用高分辨率地形数据恢复甚短波扰动重力场，确定空间分辨率2′×2′的高精度湖南省似大地水准面模型（HNGG2017）。经外部检核，模型整体精度均优于±0.022 m。与历史模型相比，新模型在湖南北部常德汉寿、西南部永州江永等地区精度得到显著改善。  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献   

徕卡RTC360三维激光扫描仪在竣工测量中的应用     

汪晓慧  吴晓培 《测绘通报》2019,(10):150-154,159

徕卡RTC360不仅操作简单、扫描速度快，而且非常智能。可以实时跟踪计算两个连续站点间的相对位置，点云实时预拼接。后期搭配Register360智能拼接软件，点云智能拼接处理，无需人工干预，简单高效。  相似文献